- Joined
- Aug 3, 2017
- Messages
- 2,437
Hi all-
I've been having some troubles with my 618 that go back to when I changed the filters way back when! So I decided to tear them apart and replace them again and be more careful this time.
However, I noticed that the filter housings say "in" and "out" and wonder if I swapped one last time?
The top filter housing comes from what looks like a drain somewhere in the top, so I don't think it is worrisome. It seems to drain into the air, so I figure the 1 pipe should be "in".
The bottom one is the one I suspect was backwards. It comes from a thick black pipe in the front of the machine, and the other side immediately goes under the surface of the oil. This one had "out" as the part that goes into the oil, which I wondered if was backwards?
Does anyone have a working machine they can take a look at and confirm for me?
I've been having some troubles with my 618 that go back to when I changed the filters way back when! So I decided to tear them apart and replace them again and be more careful this time.
However, I noticed that the filter housings say "in" and "out" and wonder if I swapped one last time?
The top filter housing comes from what looks like a drain somewhere in the top, so I don't think it is worrisome. It seems to drain into the air, so I figure the 1 pipe should be "in".
The bottom one is the one I suspect was backwards. It comes from a thick black pipe in the front of the machine, and the other side immediately goes under the surface of the oil. This one had "out" as the part that goes into the oil, which I wondered if was backwards?
Does anyone have a working machine they can take a look at and confirm for me?