- Joined
- Jun 8, 2016
- Messages
- 603
just wondering if there is any way to add a power down feed to an RF30 or RF30 clone?
Here the link to Steffans creation:
just wondering if there is any way to add a power down feed to an RF30 or RF30 clone?
2nd video is what I did 20 years ago but wanted to keep the graduated collar.Have since installed a DRO
Back then the stepper motors were expensive so I used dc with variable speed
I use a 32vdc drive which powers the y axis, down feed and rotary table(I hate cranking manually)
The motor is a little permanent magnet right angle gear drive and works very smooth
Worked with stepper motors years ago in the trade .They are really good maybe someone has a line
on some decent one at a good price