- Joined
- Dec 7, 2018
- Messages
- 653
I got a couple of ER40 collets chucks to use with my set up. Two different orders came via Amazon, but were shipped from China. A third order was via eBay. The problem in all cases is the retaining ring on the inside of the nut that the ER collet snaps into is offset relative to the rest of the nut and will not allow the collet to be inserted. Beware and check your pieces when you receive them!
Right side in the photo below has clearance but when you look at the left you can see that the entire snap in part is offset to the nut and won’t work! Grrrrrrr!
Right side in the photo below has clearance but when you look at the left you can see that the entire snap in part is offset to the nut and won’t work! Grrrrrrr!