Got a death trap ATC200E

[Aukai]

Sell it back

 

[Braeden P]

I like it too much, I can’t get the rear end to lose traction on a turn, my friends 4 wheeler does it just fine at the same speed, safer that way since it’s a solid axle and bounces on turns otherwise.

 

[jonesn7]

Those are why Honda never tried selling triked GoldWings. Cost them too much in litigation.

 

[Braeden P]

Jeat cover

 

[Braeden P]

New spark plug was fouled from oil in a week, the mixture is lean so I have bad piston rings or valve seal, probably both. Took apart the motor last night and the cam chain slipped off the bottom gear.

 

[Braeden P]

Order a 0.25mm over piston rings and a new piston, started polishing the intake port to get more hp and mpg

 

[mattthemuppet2]

Don't forget that rough ports aid swirl and mixing of the air and petrol. Many people have made their ports super smooth only to lose power and efficiency

 

[Braeden P]

They will still be rough at the end where I can’t get, it was way too rough and stoped flow especially with the larger bore and jets on the carb

 

[Firstram]

Fix it up and sell it, you can thank me later!

 

[great white]

Had a friend in high school roll one and break both legs. That summer really sucked for him…