Group Project: Small sliding bar clamp

Picture of the gear? Folks here might be able to help ;-)

Sent from my SM-G892A using Tapatalk
 
It’s a bronze worm gear that is really worn with a tooth missing and the shafts are really worn but the gearbox is 110 years old.
 
You might want to measure it and see if a modern worm/wheel combo could go in. I could be more help with pictures... non-enveloping or single enveloping worm wheels arent impossible to make; see the dividing head thread!

Sent from my SM-G892A using Tapatalk
 
It’s a Boston gear that has multiple complicated parts like key ways, set screws and lock wires a new one is $300+ I payed $200 for the lathe. I am getting a new one made by my neighbors friend has a gear shop so we will learn how to use gear hobbers and other machines.
 
Would the top clamp be ok with a laser cut edge? I can clean it up so there isnt a burr or I could leave a few thousands to mill off.
 
Sure! Just needs to be safe to handle on the edges. Not ultra flat...

Sent from my SM-G892A using Tapatalk
 
Sorry my parts are taking so long. I got all the parts cut and have a few more operations to do.
 
Mheaton92 said:
Sorry my parts are taking so long. I got all the parts cut and have a few more operations to do.
Click to expand...

I don't think anyone is in a big hurry. It's a hobby after all.
 
You must log in or register to reply here.
Back
Top