- Joined
- Sep 29, 2017
- Messages
- 2,264
I saved a lot of money today and had fun doing so. I made three ISO30 arbors for my mill. I made it out 4140. A arbor for my face mill.
![20190510_150103.jpg 20190510_150103.jpg](https://www.hobby-machinist.com/data/attachments/251/251598-0557d077da5e201c4092d2d29311d501.jpg)
One for my new B16 self tightening drill chuck wich I bought on eBay.
![20190510_150053.jpg 20190510_150053.jpg](https://www.hobby-machinist.com/data/attachments/251/251602-f6a0a1c8965c63f83e0eeb6e1d54644d.jpg)
It doesn't look tapered on the pic,but it is.
![20190510_150000.jpg 20190510_150000.jpg](https://www.hobby-machinist.com/data/attachments/251/251596-fd40f1d6472e8120d50f96480ba31f09.jpg)
I got a ER40 collet nut,also on eBay and I finally got around to the arbor.
![20190510_150126.jpg 20190510_150126.jpg](https://www.hobby-machinist.com/data/attachments/251/251599-b14c49a30870f2f65f87cad4e7427331.jpg)
![20190510_145930.jpg 20190510_145930.jpg](https://www.hobby-machinist.com/data/attachments/251/251601-fd3c1d1265ac98d34c8cd59f78e6c8cf.jpg)
And here they are.
![20190510_145919.jpg 20190510_145919.jpg](https://www.hobby-machinist.com/data/attachments/251/251600-78c218e1648c674be546b058873d9fa1.jpg)
Thanks for viewing.
Michael
![20190510_150103.jpg 20190510_150103.jpg](https://www.hobby-machinist.com/data/attachments/251/251598-0557d077da5e201c4092d2d29311d501.jpg)
![20190510_145952.jpg 20190510_145952.jpg](https://www.hobby-machinist.com/data/attachments/251/251597-cd16721250f6e6491d49399dc7819a33.jpg)
One for my new B16 self tightening drill chuck wich I bought on eBay.
![20190510_150053.jpg 20190510_150053.jpg](https://www.hobby-machinist.com/data/attachments/251/251602-f6a0a1c8965c63f83e0eeb6e1d54644d.jpg)
It doesn't look tapered on the pic,but it is.
![20190510_150000.jpg 20190510_150000.jpg](https://www.hobby-machinist.com/data/attachments/251/251596-fd40f1d6472e8120d50f96480ba31f09.jpg)
I got a ER40 collet nut,also on eBay and I finally got around to the arbor.
![20190510_150126.jpg 20190510_150126.jpg](https://www.hobby-machinist.com/data/attachments/251/251599-b14c49a30870f2f65f87cad4e7427331.jpg)
![20190510_145930.jpg 20190510_145930.jpg](https://www.hobby-machinist.com/data/attachments/251/251601-fd3c1d1265ac98d34c8cd59f78e6c8cf.jpg)
And here they are.
![20190510_145919.jpg 20190510_145919.jpg](https://www.hobby-machinist.com/data/attachments/251/251600-78c218e1648c674be546b058873d9fa1.jpg)
Thanks for viewing.
Michael