Fellows,
Something to remember if you use Oilite bushings is that the bearing surface of the bushing, whether it be the ID or OD (ID is most common), should not be drilled bored or reamed. If the diameter does need to be adjusted than reaming is the proper method but the reamer must be exceptionally sharp. Drilling, cutting or reaming Oilite bushings smears the porous surface and seals the lubricating sintered surface. This information can be found on Oilite bushing sites.
Vlad
Something to remember if you use Oilite bushings is that the bearing surface of the bushing, whether it be the ID or OD (ID is most common), should not be drilled bored or reamed. If the diameter does need to be adjusted than reaming is the proper method but the reamer must be exceptionally sharp. Drilling, cutting or reaming Oilite bushings smears the porous surface and seals the lubricating sintered surface. This information can be found on Oilite bushing sites.
Vlad