I am getting ready to order n 8X16 metal lathe. Budget dictates that it be an Asian machine. None of the ads indicate what sized cutter bits to buy. I see 1/4", 3/8" and 5/16", as well as 8mm and 10mm. Is there a way to adjust the height of the cutter so that it meets the centerline. It looks like they index on the bottom of the bit, so they would each meet the work at a different height.
Second, I am looking at Amazon as the primary source for all of the add ons and accessories. Is there another source. I prefer to give my business to small shops, even if it costs a little more, within reason.
mdd
Last, how about suggestions on machines. I can't spend more than $1500. I know most of them are made in the same Chinese factory, but I'm told that retailers make substantial changes both good and bad. They all look similar, but.....
Second, I am looking at Amazon as the primary source for all of the add ons and accessories. Is there another source. I prefer to give my business to small shops, even if it costs a little more, within reason.
mdd
Last, how about suggestions on machines. I can't spend more than $1500. I know most of them are made in the same Chinese factory, but I'm told that retailers make substantial changes both good and bad. They all look similar, but.....