- Joined
- Feb 17, 2014
- Messages
- 97
I'm wondering if there are any good plans or even good units to purchase for a miniature precision drill press. I regularly drill 0.020" holes through the edge of 3/32 steel stock. My main drill press is worn and the chuck wobbles a lot, so it makes drilling these a bit of a challenge. I need to do something to re-build my current drill press, but I thought a smaller, higher speed, more precision drill press would be in order. I'm not interested in adapting a dremel, but rather a precision stand alone unit. Before I set-out to design one, I wanted to see if there was any good options out there.
Thanks,
Eric
Thanks,
Eric