- Joined
- Dec 8, 2014
- Messages
- 84
Low gear is about 15 or 20 rpm to about 900. High speed was a little over 2000. I think the high sides will increase as it breaks in. When I first turned it on during the break in procedure, top speed was about 840 in low.
I made a new tail stock lock handle and noticed some taper. The tail stock is a little high so I need to work on that.
I already have a 5" 3 jaw chuck to go with it. I need recommendation on a 4 jaw.
I made a new tail stock lock handle and noticed some taper. The tail stock is a little high so I need to work on that.
I already have a 5" 3 jaw chuck to go with it. I need recommendation on a 4 jaw.