- Joined
- Jul 20, 2012
- Messages
- 1,238
Finally got a chance to try setting it up properly and the bugger won't do momentary switches, looks like I need latching switches. Also wondering how to get the speed spread over the whole turn of the 10k pot I have, I get to full speed in the fist quarter turn?
Look into the documentation to see what that particular controller needs. Maybe try a 5K or 2.5K pot for full range. Once the resistance is figured out it is better to have a multi turn pot like 10 turns to dial in the speed with more control.
If you are sure you get 100% speed just turn the pot to that setting and check the resistance with an ohm meter to give you the value.