- Joined
- Dec 14, 2017
- Messages
- 32
Added a 3d printed ring-light I designed, need to work on the design a bit more the column casting is oval. I'm not big on 3d design/print so each project is a work in progress
I used 2 halo led headlights one 125mm the other 145mm this has been a long term project I was going to make out of aluminum, then the 3d printer came along so I'm playing with the design on that . . .
I used 2 halo led headlights one 125mm the other 145mm this has been a long term project I was going to make out of aluminum, then the 3d printer came along so I'm playing with the design on that . . .