- Joined
- Nov 8, 2012
- Messages
- 783
I can see the logic but have to wonder about the quality of the HF bits. If the steel they use is good and the hardness is consistent then okay. All drill bits are not created equal - try a Guhring or Titex bit sometime.
I agree they aren't. I did buy a set of nicer bits at Harbor Freight, don’t remember the name/type offhand, but they are sharp and hold an edge. Think the set ran me about $80 before discount coupon.
I was thinking more of considering the OP situation. Given use in a public work area, I would hate having a $200 set of drill bits walk off.