- Joined
- Dec 13, 2018
- Messages
- 6
Just picked up this Atlas QC42 that needs some TLC and parts. I have zero experience with machining so I'm looking forward to the learning process.
This site seems to have a wealth of knowledge and resources so I'll start doing my research. In the mean time, here's some pics of its current condition.
Obviously need to find a motor, so I'll probably start there. If you see anything off in the pictures that needs to be addressed I'm all ears.
I found an old PDF of a parts manual and lathe operations so I'll get to studying that as well.
Thanks!
![IMG_8205.JPG IMG_8205.JPG](https://www.hobby-machinist.com/data/attachments/239/239483-4ba82f3367032ad5931362695e4275b1.jpg)
![IMG_8206.JPG IMG_8206.JPG](https://www.hobby-machinist.com/data/attachments/239/239484-18aa32483b4f5d73e6a93ff0ce371844.jpg)
![IMG_8207.JPG IMG_8207.JPG](https://www.hobby-machinist.com/data/attachments/239/239485-dfff0562a9d8eb5b360d9b39d0761a14.jpg)
![IMG_8208.JPG IMG_8208.JPG](https://www.hobby-machinist.com/data/attachments/239/239486-1a35260f9d0e44b06446f394f020b30f.jpg)
![IMG_8209.JPG IMG_8209.JPG](https://www.hobby-machinist.com/data/attachments/239/239487-c2cc6be241c356820a300ade7f8f0446.jpg)
![IMG_8210.JPG IMG_8210.JPG](https://www.hobby-machinist.com/data/attachments/239/239488-0fffa0c96c71c9b5fc97f648cdef3d8c.jpg)
![IMG_8212.JPG IMG_8212.JPG](https://www.hobby-machinist.com/data/attachments/239/239489-cca110e9da7baf6179ea645ee44974cc.jpg)
![IMG_8213.JPG IMG_8213.JPG](https://www.hobby-machinist.com/data/attachments/239/239490-6decd273f2ddd438a7f59560d5daedba.jpg)
![IMG_8214.JPG IMG_8214.JPG](https://www.hobby-machinist.com/data/attachments/239/239491-c6d0c49d2ae656d03fa378456dfa15b5.jpg)
![IMG_8215.JPG IMG_8215.JPG](https://www.hobby-machinist.com/data/attachments/239/239492-4ea123e5325b88f97f6984ebf860d357.jpg)
This site seems to have a wealth of knowledge and resources so I'll start doing my research. In the mean time, here's some pics of its current condition.
Obviously need to find a motor, so I'll probably start there. If you see anything off in the pictures that needs to be addressed I'm all ears.
I found an old PDF of a parts manual and lathe operations so I'll get to studying that as well.
Thanks!
![IMG_8205.JPG IMG_8205.JPG](https://www.hobby-machinist.com/data/attachments/239/239483-4ba82f3367032ad5931362695e4275b1.jpg)
![IMG_8206.JPG IMG_8206.JPG](https://www.hobby-machinist.com/data/attachments/239/239484-18aa32483b4f5d73e6a93ff0ce371844.jpg)
![IMG_8207.JPG IMG_8207.JPG](https://www.hobby-machinist.com/data/attachments/239/239485-dfff0562a9d8eb5b360d9b39d0761a14.jpg)
![IMG_8208.JPG IMG_8208.JPG](https://www.hobby-machinist.com/data/attachments/239/239486-1a35260f9d0e44b06446f394f020b30f.jpg)
![IMG_8209.JPG IMG_8209.JPG](https://www.hobby-machinist.com/data/attachments/239/239487-c2cc6be241c356820a300ade7f8f0446.jpg)
![IMG_8210.JPG IMG_8210.JPG](https://www.hobby-machinist.com/data/attachments/239/239488-0fffa0c96c71c9b5fc97f648cdef3d8c.jpg)
![IMG_8212.JPG IMG_8212.JPG](https://www.hobby-machinist.com/data/attachments/239/239489-cca110e9da7baf6179ea645ee44974cc.jpg)
![IMG_8213.JPG IMG_8213.JPG](https://www.hobby-machinist.com/data/attachments/239/239490-6decd273f2ddd438a7f59560d5daedba.jpg)
![IMG_8214.JPG IMG_8214.JPG](https://www.hobby-machinist.com/data/attachments/239/239491-c6d0c49d2ae656d03fa378456dfa15b5.jpg)
![IMG_8215.JPG IMG_8215.JPG](https://www.hobby-machinist.com/data/attachments/239/239492-4ea123e5325b88f97f6984ebf860d357.jpg)