- Joined
- Dec 29, 2013
- Messages
- 284
this is my first project post, so go easy... i'm new, ha.
my biggest complaint about my new PM-932 is that the y-axis hand wheel limits the table travel. its hits the limit switch for the power feed and i'm sure it would hit the table if that switch wasn't three.
so, today i started working on a new handle. the first piece (what i did today) has to match the 3 lug interface of the lead screw. without having a dividing head or rotary table, here is what i came up with.
what do ya think? i drilled the six holes and simply "clocked" the piece around with pins as i milled away.
![10443020_880859728609292_7970462398162068457_o.jpg 10443020_880859728609292_7970462398162068457_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39470-f2a57ea89a54af2fcea7022eb0bf080a.jpg)
![10530511_880859731942625_5051044273222284353_o.jpg 10530511_880859731942625_5051044273222284353_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39471-1afb9b75a185acf5e74cdd0f7d430f11.jpg)
![10448716_880859738609291_2274490999982853357_o.jpg 10448716_880859738609291_2274490999982853357_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39472-3fc2d856e39ca169e141e556d0ee99f0.jpg)
![10551488_880859735275958_4251363006633717388_o.jpg 10551488_880859735275958_4251363006633717388_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39473-c5400f169245ef4fa0ad7c702f57c940.jpg)
- - - Updated - - -
finished piece and then placed on the current hand wheel to show fitment. now i just need to make the handle part and attach it to the center piece. probably just drill the same hole pattern and bolt it together with m5 countersunk bolts. since getting my countersink set, i really like the custom touch something so simple provides.
![10548160_880859928609272_4637127118826473246_o.jpg 10548160_880859928609272_4637127118826473246_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39474-78961eec15367f10575f2b785468babb.jpg)
![10549245_880859935275938_3444958140100889695_o.jpg 10549245_880859935275938_3444958140100889695_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39475-8cc64c3a3e45323a05e07b1c861d02b8.jpg)
![10549245_880859935275938_3444958140100889695_o.jpg 10549245_880859935275938_3444958140100889695_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39475-8cc64c3a3e45323a05e07b1c861d02b8.jpg)
my biggest complaint about my new PM-932 is that the y-axis hand wheel limits the table travel. its hits the limit switch for the power feed and i'm sure it would hit the table if that switch wasn't three.
so, today i started working on a new handle. the first piece (what i did today) has to match the 3 lug interface of the lead screw. without having a dividing head or rotary table, here is what i came up with.
what do ya think? i drilled the six holes and simply "clocked" the piece around with pins as i milled away.
![10443020_880859728609292_7970462398162068457_o.jpg 10443020_880859728609292_7970462398162068457_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39470-f2a57ea89a54af2fcea7022eb0bf080a.jpg)
![10530511_880859731942625_5051044273222284353_o.jpg 10530511_880859731942625_5051044273222284353_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39471-1afb9b75a185acf5e74cdd0f7d430f11.jpg)
![10448716_880859738609291_2274490999982853357_o.jpg 10448716_880859738609291_2274490999982853357_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39472-3fc2d856e39ca169e141e556d0ee99f0.jpg)
![10551488_880859735275958_4251363006633717388_o.jpg 10551488_880859735275958_4251363006633717388_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39473-c5400f169245ef4fa0ad7c702f57c940.jpg)
- - - Updated - - -
finished piece and then placed on the current hand wheel to show fitment. now i just need to make the handle part and attach it to the center piece. probably just drill the same hole pattern and bolt it together with m5 countersunk bolts. since getting my countersink set, i really like the custom touch something so simple provides.
![10548160_880859928609272_4637127118826473246_o.jpg 10548160_880859928609272_4637127118826473246_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39474-78961eec15367f10575f2b785468babb.jpg)
![10549245_880859935275938_3444958140100889695_o.jpg 10549245_880859935275938_3444958140100889695_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39475-8cc64c3a3e45323a05e07b1c861d02b8.jpg)
![10443020_880859728609292_7970462398162068457_o.jpg 10443020_880859728609292_7970462398162068457_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39470-f2a57ea89a54af2fcea7022eb0bf080a.jpg)
![10530511_880859731942625_5051044273222284353_o.jpg 10530511_880859731942625_5051044273222284353_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39471-1afb9b75a185acf5e74cdd0f7d430f11.jpg)
![10448716_880859738609291_2274490999982853357_o.jpg 10448716_880859738609291_2274490999982853357_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39472-3fc2d856e39ca169e141e556d0ee99f0.jpg)
![10551488_880859735275958_4251363006633717388_o.jpg 10551488_880859735275958_4251363006633717388_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39473-c5400f169245ef4fa0ad7c702f57c940.jpg)
![10548160_880859928609272_4637127118826473246_o.jpg 10548160_880859928609272_4637127118826473246_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39474-78961eec15367f10575f2b785468babb.jpg)
![10549245_880859935275938_3444958140100889695_o.jpg 10549245_880859935275938_3444958140100889695_o.jpg](https://www.hobby-machinist.com/data/attachments/39/39475-8cc64c3a3e45323a05e07b1c861d02b8.jpg)