Carbon removal from piston

[mofosheee]

Tip on walnut shell, whenever I need it I go straight to the pet store. It's like cat litter for reptiles, and really cheap. It's crushed, sieved, and washed, so very clean and uniform. I tumble brass with it, but it should feed through a siphon blaster really well.

What about using walnut shells in a vibratory tumbler?

 

[Cadillac]

Were you standing on one leg while doing all this?

 

[pontiac428]

What about using walnut shells in a vibratory tumbler?

That's how I use it for brass and random small parts, but mine's too small for pistons.

 

[deakin]

what's the point? scrape off the carbon and leave the stain.

 

[Charles scozzari]

what's the point? scrape off the carbon and leave the stain.

Bumps up that compression to boot.

 

[Deleted member 69715]

Get your pistons spotless; but looking at those rusted cylinder studs you've got more fun ahead of you. If you're going to get into the bottom end.

 

[mofosheee]

Get your pistons spotless; but looking at those rusted cylinder studs you've got more fun ahead of you. If you're going to get into the bottom end.

Spent $400 to replace those studs..................

 

[mofosheee]

Were you standing on one leg while doing all this?

Yes, I have only one leg. Lost one to cancer