- Joined
- Dec 14, 2013
- Messages
- 167
It's nice to see your drive box assembly coming along nicely. If for any reason you need some pictures taken to clarify any portion of your assembly let me know and I can take the pictures you need and upload them to this thread.
I checked some of the pictures I have to see if there were two rear mount holes where the belt guard mounts to the frame and found mine only has one. Perhaps an additional hole was drilled when the motor was replaced? My lathe has an Atlas 1/2 HP motor in it so I think it was changed at some time along the way. Here's a picture of my drive box showing the rear belt guard mounting hole:
I checked some of the pictures I have to see if there were two rear mount holes where the belt guard mounts to the frame and found mine only has one. Perhaps an additional hole was drilled when the motor was replaced? My lathe has an Atlas 1/2 HP motor in it so I think it was changed at some time along the way. Here's a picture of my drive box showing the rear belt guard mounting hole:
Last edited: