10” x 30” lathe master electrical problem

[markba633csi]

In other words, the guard switch may be using the com and the normally open contact if the switch is pushed closed by the guard when it's down. Then lifting the guard opens the circuit, drops out the relay and stops the motor.
Be careful testing, don't let it short out or shock you

 

[KUNGFOMATIC]

Yes I got it, the guard witch can but setup either normally open or normally closed.

 

[KUNGFOMATIC]

Yes I think that is the correct operation

 

[KUNGFOMATIC]

I am off to find some switches

 

[KUNGFOMATIC]

This should work with the on off toggle correct ?

 

[KUNGFOMATIC]

I made a mistake the pins 1 and 5 on the drum switch had a jumper also

 

[KUNGFOMATIC]

Here is my switch idea, momentary on/off to the right and on/off toggle with the aircraft emergency paddle on it.

 

[markba633csi]

Yep the button should work

 

[KUNGFOMATIC]

its only rated for 6Amps will it be ok to use

 

[KUNGFOMATIC]

Would this switch work better