- Joined
- Jan 10, 2014
- Messages
- 200
The height of the stand by itself from the bottom to the floor of the chip pan is 26 inches. The base I built adds about another 4". Im 6 feet tall and the height of the bed is sufficient for me, though if it was a little higher, that would be fine.
One thing to consider about using the tool box as a stand: the lip. The chip pan's lip is 1" tall and the gear cover hangs over it and beyond about a half inch. The cover will have to be able to clear the lip so you will be able to take it off and put it on when you need to.
One thing to consider about using the tool box as a stand: the lip. The chip pan's lip is 1" tall and the gear cover hangs over it and beyond about a half inch. The cover will have to be able to clear the lip so you will be able to take it off and put it on when you need to.