As others have mentioned, those bushings are inexpensive.
The bushings are quite a tight fit in those sleeves. I had no luck with an arbor press, and had to locate a hydraulic press to get them in. Also, you may have to resize the bushing inside diameter after you press them in.
Very nice work, on both the lathe and the stand.
The bushings are quite a tight fit in those sleeves. I had no luck with an arbor press, and had to locate a hydraulic press to get them in. Also, you may have to resize the bushing inside diameter after you press them in.
Very nice work, on both the lathe and the stand.