- Joined
- Mar 31, 2015
- Messages
- 397
wow...
I'll add a tip for the surface grinders, the tables are just held on by gravity. Take 4x4 or 6x6 wooden blocks to put between the table and the spindle. (Best if you can get it under the spindle and not the grinding wheel/spindle bearings/broken stone) Lower the spindles until they secure the table good! Otherwise they can bounce in transit and ruin your ways.
I've actually been looking for a surface grinder..........
I'll add a tip for the surface grinders, the tables are just held on by gravity. Take 4x4 or 6x6 wooden blocks to put between the table and the spindle. (Best if you can get it under the spindle and not the grinding wheel/spindle bearings/broken stone) Lower the spindles until they secure the table good! Otherwise they can bounce in transit and ruin your ways.
I've actually been looking for a surface grinder..........