- Joined
- Dec 28, 2015
- Messages
- 115
Ok as soon as I get a chance I will get the motor on it and start working on a degrease of spindle. I had to degrease the ways already they were covered in grease, all the lube holes had a bolt threaded in them that was painted around so they have been there awhile. I have gave the machine a good kerosene bath and got all the lube holes freed and flowing kerosene then light oil. Once I get it going and see if it has an accuracy potential I will order some proper oil for ways.
Any idea on max Rpms on those old spindles?
Any idea on max Rpms on those old spindles?