I do not think the speed is changeable on these motors by switching the wiring. I think the 2 smaller gauge blue wires go to the capacitor and the white, larger blue and the yellow wires go to the start and run windings in the motor.
Google translate has a camera capture ability and its pretty good at actually seeing the correct things. You can draw them too and it will give you a list of the closest matching to pick from, easy peasyInteresting.
How the heck did you do that?
Yes = 2 x 110v leads and a ground.Google translate has a camera capture ability and its pretty good at actually seeing the correct things. You can draw them too and it will give you a list of the closest matching to pick from, easy peasy
And im gonna ask you a very Stupid question cause i would bet you did it correctly....when you wired in the controller you did pull two 110v leads into the connection correct? Figure have the voltage half the speed so I had to ask!