- Joined
- Jul 14, 2017
- Messages
- 2,451
Today i had a project to do on the lathe, i needed to make a small flange from a very hard steel, it is for some high heat machine, and must be made from this casting, this job has been to two other machinest who could not machine it, i had to switch inserts and tools thill i could find a combo that worked, it is some thigh steel must be 5-60 rockwell, the lathe handle it with ease.
![288806 288806](https://www.hobby-machinist.com/data/attachments/246/246027-0ba6ad082d75418d08082b1ffb059748.jpg)
![288807 288807](https://www.hobby-machinist.com/data/attachments/246/246028-0db9335bfe9c3a56c9d16e49b31da8b8.jpg)
![288808 288808](https://www.hobby-machinist.com/data/attachments/246/246029-6fe6ffc3266983e847154fa3656a8fd0.jpg)
![288805 288805](https://www.hobby-machinist.com/data/attachments/246/246026-81086c0f3d47ce8ec133f0dbe901f9f8.jpg)
![288806 288806](https://www.hobby-machinist.com/data/attachments/246/246027-0ba6ad082d75418d08082b1ffb059748.jpg)
![288807 288807](https://www.hobby-machinist.com/data/attachments/246/246028-0db9335bfe9c3a56c9d16e49b31da8b8.jpg)
![288808 288808](https://www.hobby-machinist.com/data/attachments/246/246029-6fe6ffc3266983e847154fa3656a8fd0.jpg)
![288805 288805](https://www.hobby-machinist.com/data/attachments/246/246026-81086c0f3d47ce8ec133f0dbe901f9f8.jpg)