- Joined
- Jan 28, 2011
- Messages
- 3,485
Could a simple tighten the hose clamps. Rubber hoses do compress under the clamps and can leak there. Old hoses do get stiff/hard and should be replaced from time to time.
With the engine off, run a finger on the back side of the water pump pulley. Wet? Thermostat housing do corrode a fair bit under the rubber hose. Once the front of the engine is wiped off, it will be easier to trace a coolant leak.
With the engine off, run a finger on the back side of the water pump pulley. Wet? Thermostat housing do corrode a fair bit under the rubber hose. Once the front of the engine is wiped off, it will be easier to trace a coolant leak.