- Joined
- Sep 8, 2019
- Messages
- 4,392
That thread looks to be entirely pertinent to my issue.Threading on a PM1127 lathe - turning instead of threading
Does anyone have a Precision Matthews PM1127 lathe and has been threading with it? I put it on threading leadscrew, going from right to left. I've tried on A, B, C, speeds. It turns the workpiece instead of threading. I tried different depths of cut from .001 to .010. I used a carbide threading...www.hobby-machinist.com
I know it's for a different model, but the chart looks like it works the same way.