- Joined
- Jul 27, 2013
- Messages
- 295
Ha!
Sounds like the same old story. My working lathe is so old and loose that hitting targets takes extreme patience, and unfortunately, LUCK. The dials are virtually useless. I eek my way along, tiny cut after tiny cut, working toward a fit, reach the point where I say, "ah... just one more", and bam... too much!
I empathize.
Sounds like the same old story. My working lathe is so old and loose that hitting targets takes extreme patience, and unfortunately, LUCK. The dials are virtually useless. I eek my way along, tiny cut after tiny cut, working toward a fit, reach the point where I say, "ah... just one more", and bam... too much!
I empathize.